ACI 307R-98-Commentary on Design and Construction of Reinforced Concrete Chimneys

ACI 307R-98-Commentary on Design and Construction of Reinforced Concrete Chimneys


ACI 307R-98-Commentary on Design and Construction of Reinforced Concrete Chimneys

The standard gives material, construction, and design requirements for circular cast-in-place reinforced concrete chimneys. It sets forth minimum loadings for the design of reinforced concrete chimneys and contains methods for determining the concrete and reinforcement required as a result of these loadings.

 

The method of analysis applies primarily to chimneys. Equations are provided for determining the temperature gradient through the concrete resulting from the difference in temperature of the gases inside the chimney and the surrounding atmosphere. Methods for combining the effects of dead and wind (or earthquake) loads with temperature both vertically and circumferentially are included in the standard. These methods permit the designer to establish minimum concrete and reinforcement requirements.


This material for VIP member only, become VIP member to unlimit any download : Detail here

- VIP for 01 day : 8 USD (Accept and recommend pay by paypal)
- VIP for 01 month : 30 USD (Accept pay by paypal or bank account/VISA card/Western Union)
- VIP for 01 year : 75 USD (Accept pay by paypal or bank account/VISA card/Western Union)
* Below is payment button by paypal, If you pay by other methods, pls contact us (huyhuumik@gmail.com).

* Notes : The VIP account will be sent to your PAYPAL EMAIL after you pay (if you use paypal), it normally takes a few minutes, sometime it takes a few hours. If you use other emails pls contact us


- HuyHuu Team - View (610)



CopyRight © HuyHuu-2017